pic

3 Digit Dot Matrix Display with SPI interface is an advanced version of recently published 7x5 Dot Matrix Character Generator project. This design is more complex as it contains 4 microcontrollers. Three PIC16F88 were used to control 7x5 Dot Matrix Displays, ...

In this post I'll show how you can drive 7 Segment LED display with PIC16F876A. Instead of using a dedicated IC’s like 4511 we’ll program the micro controller to convert  BCD input code 0 – 9 to a 7 Segment LED ...

Here is a modified and improved electronic lock design. For Arduino version click here.It is largely based on Digital Lock article, however this time a real electronic lock was used instead of a solenoid. The code is a 4 digit number ...

In this article I’ll show you how you can use PIC microcontroller to record and store waveform patterns in its EEPROM memory and replay the sequence later. For this purpose we’ll need a signal/waveform generator to produce the signal, PIC ...

Fan Speed Monitor is another simple design based on PIC16F876A microcontroller. Two similar posts about ways of controlling and monitoring fan speed were recently published. PWM Fan Controller and 2 Channel PC Fan Controller. Current article however implements a different ...

In this post I'm going to show you how to build a simple Digital Lock using PIC microcontroller. Instead of building a new hardware design from scratch we are going to use PIC Development Board as a basis for Digital ...

Wireless Infrared UART prototype can be built by using two PIC16F876A controllers. One as IR receiver with dedicated Infrared decoder like SFH505A, SFH506 or similar IR receiver IC and other microcontroller as a transmitter via IR LEDs. This is relatively simple ...

This is an upgrade to recently published Simple Digital Voltmeter.Few improvements were done to hardware and software.DVM operating range  was slightly increased up to 24 V Max, however the most significant change is that the code now uses full 10 bit of ...

In this short tutorial we’ll learn how to control PCF8591 I2C 8-bit A/D and D/A converter with PIC microcontroller. PCF8591 was already used in a number of recently published projects like Function Generator, also I’m planning to add it to ...

This is an update to a recent post on a subject of building a Digitally Controlled Power Supply. In part 1 a basic configuration was presented. In this version a numbers of modifications were made to software/hardware to produce a more advanced ...